Black Widow Pro Series - Street/Strip 10.5" WB 200mm Chassis Kit (2019)
2019 Pro Series -Street/Strip 10.5" WB 200mm body chassis kit"
Features - USA 2.5mm Carbon Fiber
Designed for the Lowest CG possibly
-Longer Rear axle at 5.25" and spacers to adjust to fit rear wheels inside 200mm bodies.
-Front wheel 5mm dia axle track width is 6" from axle to axle tip
-1s or 2s Battery strap slots -Battery can be slid front to back and has front & Mid chassis stop posts
-Bolt on front wheel bumper wing guards, multi placement body post mounting
-One of a kind (First ever offered here by RCRI ) front end system using black TRA steering knuckles, metal bearings and 5mm/nut axle with custom sized Titanium steering knuckle pins w/e clips.(Can use drag front skinnies or Traxxas weld wheel fronts)
-Dual micro steering servo mount placement, above top deck or below
- Titanium steering turnbuckles and heavy duty rod ends
-Titanium 5mm front axle (OPTIONAL) standard 5mm bolt axles
- Top deck plate utilizing a (First ever offered here by RCRI) unique staggered standoff bolt pattern to maximize strength and eliminate twist.
- Rear Pod titanium/top plate tweak lock down turnbuckles
- Black Anodized knurled posts , cross members & Black anodized rear pod hex mount.
- Rear Motor pod utilizes another (First ever offered here by RCRI) Locking tab to chassis system
- Motor is positioned to be the lowest LCG it can go
- Polished Aluminum rear axle and 3/4" Clamp Hubs
- Large Dia 1/2" rear axle bearings with (Future upgradable bearing hub carriers)
- 7 1/2" Adjustable Ladder style wheelie bar with another (First ever offered here by RCRI) Tab locking deck plate to side rails.
-Stainless steel metric hardware
-Counter bored bottom screw holes
-Metal shielded bearings
All packed into a very light weight kit (13.65oz as pictured ) with pro racer features with many first ever design features offered anywhere...
Ships unassembled -
Required to complete -
-spur gear 96T , 99T 48P and 18-22T pinion or your own choice
-pinion (We sell the top of the line composite 99t & 96t 48p spur gears here)
-Electronics- Radio , Motor, Esc , receiver.
-Micro steering servo & servo single arm usually comes with servo - (Savox SH-0265MG ) and short servo mounts.
1 -Can use 1 1/2" - 2" Front drag skinny rims & 1/10 rear foam drag rims. Foam 2.75"x1.75" https://tmrcracing.com/175-x-2750-7865N.htm ultra foam compound best or Traxxas Front Weld Wheels.
-Single style Body post and holders- 3-3.5" rear and 2-2.5" fronts https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXD241&P=7
Also can use
-Any 10.5" wheelbase body 190-200m wide
Note : The M5 bolt for front axle may be tiny loose on some front wheels , using Teflon tape on threads or using TRA 3637 part number but must dermal slit on head to use screwdriver to tighten nut.
Kits can take few days to few weeks to cnc and ship. All based on timing of order and how backed up we are when placed. Tracking gets emailed when shipped.