No Prep 15.5" Long LADDER Bar with Deck plate.
SHIPPING NOTE MUST CHOOSE PRIORITY MAIL CHASSIS BOX SHIP OPTION BEING SO LONG OF A PRODUCT. ANY OTHER OPTION CHOOSE AND ORDER WILL BE CANCELED
Traxxas slash width style ladder bar with lower deck plate and our recessed locking nut fastening system. Also has a few cross posts for extra rigidity being a 15.5" long Measuring from rear mount hole to center of wheel axle. (When using after market mounts you can use this ladder bar on DR10S,SLASH,B6 etc
1" dia hard rubber dual bearing rear wheels.
Comes UNASSEMBLED
Use 2 ways - dual shocks or rigid using turnbuckles to adjust heights.
Available in black 3mm composite ONLY
Assembly instructions below
Use the 20mm pan screws,2 5mm washers and nut for attaching wheels,
for deck plate using 6 8mm pan screws and nuts , starting screw and hold nut inside nut housing opening after started use pliers to hold nut still while tightening (Tip on the center 2 using a knife between nut and plate will secure it enough to lock it down)