No Prep (Street Eliminator) Dual Shock 10" & 12"Ladder Bar (INSTOCK)
NOTE: RECOMMENDED TO USE BLUE LOCTITE ON SCREWS. Good way to lock pivot screw on bar to mount is a longer screw and nut on other end tighten just enough to allow smooth pivot.
Fits - No prep Team Associated B6 platforms, DR10 , Losi TLR 22 ,Traxxas slash 2wd Drag (Street Eliminator) Designed for R Designs rear ladder bar mounts.
This Ladder bar is designed to offer user adjustability of pre load on ladder bar with loads of tunability with shocks, spring rates, shock oil thickness, shock mounting positions and many cross post brace configurations.
Includes - 3mm thick black composite 10" ladder bar , 5 cross posts , shock mounting support posts and hardware . Dual 0.95" dia rubber wheels with bearing center for ultra smooth roll on bar.
- Uniquely configured shock mount hole placements to fine tune rate of shock.
- Can use solid turnbuckles instead of shocks also.
- Shocks NOT INCLUDED - Can use 65mm,70mm,75mm,80mm,85mm and Most common and designed for 90mm traxxas slash 2wd front shocks (Or any aftermarket 90mm) Also can use rock crawler 90mm shocks which are narrower in dia but offer same compression rate as buggy shocks.
Note: Can use with traxxas stock rear mount or rpm plastic rear mount but shock have to mount to outside of bar.