- Traxxas Slash"Street Eliminator" Drag Upgrades
- >
- Traxxas "Pro Slash No Prep" Black Composite Drag Kit (Read description)
Traxxas "Pro Slash No Prep" Black Composite Drag Kit (Read description)
Black Composite 3mm
This kit fits Traxxas bandit/slash 2wd/rustler front and rear assembly bolt on to convert to a street eliminator drag street chassis.
Features -
Stock 13.2" slash SCT Wheelbase
Black composite
Recessed Bottom chassis for screws
Based around our popular black widow design
Black Aluminum posts
Lower LCG
Lower chassis with deck plate using our staggered mount hole pattern
Widened Bell crank with RCRI NS ( No slop bearing link)
Dual placement option for servo (Servo can be mounted on bottom chassis or top mount plate which allows battery to be brought full forward for more front weight)
Unique Y front end tie in plate
Dual rear anti twist control titanium turnbuckles
Flipped front bulkhead design for true drag upright suspension
2s capable with 2s full movement forward and back to transfer weight for traction (25mm battery height .
Hot racing transmission only - OPTIONAL rear extended motor plate for more gearing options
Required to complete -
Traxxas rear transmission/rpm bandit rear suspension arms assembly ,front end bulkhead/rpm bandit suspension arms, caster blocks, knuckles , turnbuckles for caster and steering, axles etc, traxxas shocks ,wheels and tires, body, shock towers ,bell crank (recommended hot racing aluminum one with bearings) electronics and servo mounts.
Standard Kit includes -
Black composite chassis kit upper and lower
Y tie in front end kit
Black anodized knurled posts
Rear Delrin wide profile tower and mount plate
Built in rear body mount location for rear posts
Bell crank bolts and bearing spacers
Bell crank NS connection bearing link
titanium tweak rods and steering linkage W/rod ends
All necessary hardware and spacers
Adding these options below gives you a full upgraded kit we offer for street eliminator
Optional -Ladder bar 8.5" ,10" or 12"
Optional - Hot racing trans extended rear motor plate
Optional - front Delrin low tower
Comes unassembled - see our kit assembly instructions menu link on home screen
Please allow few days to few weeks on these kits their in high demand . This timing of when it ships is dependent on current order load when you order. Please ask before ordering if in a rush. Please read policy/shipping page for info.