Traxxas "Pro Street Eliminator" Carbon Fiber Edition Pro Drag Kit
This kit fits Traxxas bandit/slash 2wd/rustler front and rear assembly bolt on to convert to a street eliminator drag street chassis.
Please note these are machined to order and in heavy demand allow time to process and ship.
Now available with your choice of Red anodized knurled Black or Red top plate posts.
Red post option not available at this time their on B/O
Stock 13.2" slash SCT Wheelbase
USA Gloss Carbon fiber
Recessed Bottom chassis for screws
Based around our popular black widow design
Black or Red Anodized knurled Aluminum posts
Lower chassis with deck plate using our staggered mount hole pattern
Widened Bell crank with RCRI NS ( No slop bearing link)
Dual placement option for servo (Servo can be mounted on bottom chassis or top mount plate which allows battery to be brought full forward for more front weight)
Unique Y front end tie in plate
Dual rear anti twist control titanium turnbuckles
Flipped front bulkhead design for true drag upright suspension
2s capable with 2s full movement forward and back to transfer weight for traction (25mm battery height to deck)
Hot racing transmission only - OPTIONAL rear extended motor plate for more gearing options
2 wheelie bar choices 8" flat or ladder bar (Must use rpm or stl rear bumper mount)
Required to complete -
Traxxas rear transmission/rpm bandit rear suspension arms assembly front end bulkhead/rpm bandit suspension arms, caster blocks, knuckles , turnbuckles for caster and steering, axles etc, traxxas shocks ,wheels and tires, body, shock towers ,bell crank (recommended hot racing aluminum one with bearings) electronics and servo mounts.
Standard Kit includes -
Carbon fiber chassis kit upper and lower
Y tie in front end kit
Black anodized knurled posts
Built in rear body mount location for rear posts
Rear low profile Delrin shock tower and mount plate
Bell crank bolts and bearing spacers
Bell crank NS connection bearing link
All necessary hardware and spacers
Titanium servo to bell crank turnbuckle and rod end links
Titanium rear anti twist dual turnbuckles and rod end links
8" flat 2019 3mm thick wheelie bar with rubber wheel and mount plate
Adding these options below gives you a full upgraded kit we offer for street eliminator
Optional -Ladder bar with deck plate
Optional - Hot racing trans extended rear motor plate
Optional - front low profile tower
Comes unassembled - see our kit assembly instructions menu link on home screen
Please allow few days to few weeks on these kits their in high demand . This timing of when it ships is dependent on current order load when you order. Please ask before ordering if in a rush. Please read policy/shipping page for info.