Black Widow Pro Series - ProMod 12" WB Chassis Kit
2019 Pro Series -ProMod 12" Wheelbase
Now available with choice of red or black knurled anodized aluminum top plate and front 25mm posts.
Specs - Overall length without wheelie bar 15"
front end width - 5.25" wheel to wheel. ( Use this to check body specs you plan to use for front width fitment)
Rear 6 .25" rim to rim if using 1.5-1.75" wide rims.
Features - USA 2.5mm Carbon Fiber or 3mm black composite
Designed for the Lowest CG possibly
-2s promod Battery strap slots -Battery can be slid front to back and has front stop posts
-Bolt on front wheel bumper guards, multi placement body post mounting
-One of a kind (First ever offered here by RCRI ) front end system using black TRA steering knuckles, metal bearings and 5mm/nut axle with custom sized Titanium steering knuckle pins w/eclips
-Dual micro steering servo mount placement, above top deck or below
- Titanium steering turnbuckles and heavy duty rod ends
-Titanium 5mm front axle (OPTIONAL) standard 5mm bolt axle
- Top deck plate utilizing a (First ever offered here by RCRI) unique staggered standoff bolt pattern to maximize strength and eliminate twist.
- Rear Pod titanium/top plate tweak lock turnbuckle
-rear 1/4" x 4" axle
- Black Anodized knurled posts , cross members & Black anodized rear pod hex mount.
- Rear Motor pod utilizes another (First ever offered here by RCRI) Locking tab to chassis system
- Motor is positioned to be the lowest LCG it can go
- (Not included) Polished Aluminum rear axle and 3/4" Clamp Hubs
- Large Dia 1/2" rear axle bearings with (Future upgradable bearing hub carriers)
- 7 1/2" Adjustable Ladder style wheelie bar with another (First ever offered here by RCRI) Tab locking deck plate to side rails.
-Stainless steel metric hardware
-Counter bored bottom screw holes
All packed into a very light weight kit with pro series racer features with many first ever design features offered anywhere...
Ships unassembled -
Required to complete -
-96 tooth or higher spur gear (Sold here at RCRI) (composite 48p 99t recommended)
-18-24 tooth pinion
-Electronics- Radio,Motor, Esc (Tekin RS Pro Black 1-3s esc recommended) , receiver, receiver pack, cap pack and battery 1s (Fantom Drag series 1s batteries & Fantom Icon Modified 2.0T,2.5T,3.0t or 3.5T motors recommended. (All electronics recommended are for serious drag racers ,you my use what ever you like)
-Micro steering servo & servo single arm usually comes with servo - (Savox SH-0265MG ) short servo mounts
-1 1/2" - 2" Front drag skinny rims & 1/10 rear foam drag rims. Foam 2.75"x1.75" https://tmrcracing.com/175-x-2750-7865N.htm ultra compound best.
-Single styleBody post and holders- 3-3.5" rear and 2-2.5" fronts https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXD241&P=7
Also can use
-ProMod body 12" wheelbase- Sold at rc car kings.net ,many to choose out their and many new ones offered.
Note : The M5 bolt for front axle may be tiny loose on some front wheels , using Teflon tape on threads or using TRA 3637 part number but must dermal slit on head to use screwdriver to tighten nut.
Kits can take few days to few weeks to cnc and ship. All based on timing of order and how backed up we are when placed. Tracking gets emailed when shipped.