Black Widow Pro Series - Prostock 11" WB Chassis Kit (2019)
2019 Pro Series -Prostock 11" Wheelbase
Features - USA 2.5mm Carbon Fiber
Designed for the Lowest CG possibly
-1s prostock or 2s promod Battery strap slots -Battery can be slid front to back and has front stop posts
-Bolt on front wheel bumper guards, multi placement body post mounting
-One of a kind (First ever offered here by RCRI ) front end system using using black TRA steering knuckles, metal bearings and 5mm/nut axle with custom sized Titanium steering knuckle pins w/e clips
-Dual micro steering servo mount placement, above top deck or below
- Titanium steering turnbuckles and heavy duty rod ends
-Titanium 5mm front Axle (Coming soon )
- Top deck plate utilizing a (First ever offered here by RCRI) unique staggered standoff bolt pattern to maximize strength and eliminate twist.
- Rear Pod titanium/top plate tweak lock turnbuckles
-Black Anodized Precision cnc Rear 1/4" x 4" axle
- Black Anodized knurled posts , cross members & Black anodized rear pod hex mount.
- Rear Motor pod utilizes another (First ever offered here by RCRI) Locking tab to chassis system
- Motor is positioned to be the lowest LCG it can go
- Polished Aluminum rear axle and 3/4" Clamp Hubs
- Large Dia 1/2" rear axle bearings with (Future upgradable bearing hub carriers)
- Choose from either the 7 1/2" Adjustable Ladder style wheelie bar with another (First ever offered here by RCRI) Tab locking deck plate to side rails. Or 7" Single wheelie bar.
-Stainless steel metric hardware
-Counter bored bottom screw holes
As pictured weighs 13.65oz prostock shown.
All packed into a very light weight kit with pro racer features with many first ever design features offered anywhere...
Ships unassembled -
Required to complete -
-96 tooth or higher spur gear (Sold here at RCRI) (composite 48p 99t recommended)
-18-24 tooth pinion
-Electronics- Radio,Motor, Esc (Tekin RS Pro Black 1-3s esc recommended) , receiver, receiver pack, cap pack and battery 1s (Fantom Drag series 1s batteries & Fantom Icon Modified 2.0T,2.5T or 3.0t motors recommended. (All electronics recommended are for serious drag racers ,you my use what ever you like)
-Micro steering servo & servo single arm usually comes with servo - (Savox SH-0265MG ) and short servo mounts
-1 1/2" - 2" Front drag skinny rims & 1/10 rear foam drag rims. Foam 2.75"x1.75" https://tmrcracing.com/175-x-2750-7865N.htm ultra compound best.
-Single styleBody post and holders- 3-3.5" rear and 2-2.5" fronts https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXD241&P=7
Also can use
-Prostock body 11" wheelbase Sold at rc car kings.net ,many to choose out their and many new ones offered.
Note : The M5 bolt for front axle may be tiny loose on some front wheels , using Teflon tape on threads or using TRA 3637 part number but must dermal slit on head to use screwdriver to tighten nut.
Kits can take few days to few weeks to cnc and ship. All based on timing of order and how backed up we are when placed. Tracking gets emailed when shipped.