Traxxas Bandit/Slash2WD/E Rustler/Nitro Rustler Rigid Front End Drag Kit
This 3mm thick Black G10 or 3mm carbon fiberfront end kit willlet you convert your stock traxxas slash 2wd,bandit,stampedeor nitro and electric rustler front end and making it a rigid front for drag racing. Remove your shock tower and bolts to your bulkhead. requires longer traxxas turnbuckles. Suspension arms get flipped around (Will make wheelbase a bit longer from axle to axle). Has 2 position holes for front ride height adjustment.
Designed in vertical position mount for the most strength and is very strong.
Comes with screw hardware.
Direct bolt on with integy aluminum slash front arms or Recommended to use with RPM front suspension arms Slash/rustler/stampede use RPM80242 . For Bandit and nitro rustler use RPM80492. Using a Dremel is is fastest and easiest to do the required notch so arm bolts in snug. (See picture) were to do it. Use a 3mm drill bit to extend screw hole into suspension arm so 30mm screw goes through arm and into back side of suspension arm. Takes only few min to do and once down your front is rock solid.
Shown in pictures bolted to traxxas slash aluminum integy upgrades (Sold separately)